Sierra Video 3232HD-3G - Manual (Page 19)

ASPEN 1616 AND 3232HD/SDI 3G ROUTING SWITCHER
9
Change Network Parameters
To make changes to the network communications (i.e. IP address), select the “Network”
tab.
The front panel has the ability to change the network address. If you wish to disable this
function, remove the check from the box “Allow Network Settings to be changed from the
front panel”.
The “refresh” button will re-read the current settings in the routing switcher.
Make any changes necessary and press “Save” to implement changes.
Note:
Changing any parameters in this window will cause your browser to lose communication with the
routing switcher. You must enter the new IP address in your browser to re-establish
communications.
Routing switcher need not be reset for changes to take effect.
DHCP is not supported.