Sensoray 2518 - Manual (Page 4)

Sensoray Model 2518/2519 Ethernet Smart A/D™ 1 Basics
Chapter 1: Basics
1.1 Limited Warranty
Sensoray Company, Incorporated (Sensoray) warrants
the Model 2518/2519 hardware to be free from defects in
material and workmanship and perform to applicable
published Sensoray specifications for two years from the
date of shipment to purchaser. Sensoray will, at its
option, repair or replace equipment that proves to be
defective during the warranty period. This warranty
includes parts and labor.
The warranty provided herein does not cover equipment
subjected to abuse, misuse, accident, alteration, neglect,
or unauthorized repair or installation. Sensoray shall have
the right of final determination as to the existence and
cause of defect.
As for items repaired or replaced under warranty, the
warranty shall continue in effect for the remainder of the
original warranty period, or for ninety days following
date of shipment by Sensoray of the repaired or replaced
part, whichever period is longer.
A Return Material Authorization (RMA) number must be
obtained from the factory and clearly marked on the
outside of the package before any equipment will be
accepted for warranty work. Sensoray will pay the
shipping costs of returning to the owner parts that are
covered by warranty.
Sensoray believes that the information in this manual is
accurate. The document has been carefully reviewed for
technical accuracy. In the event that technical or
typographical errors exist, Sensoray reserves the right to
make changes to subsequent editions of this document
without prior notice to holders of this edition. The reader
should consult Sensoray if errors are suspected. In no
event shall Sensoray be liable for any damages arising
out of or related to this document or the information
contained in it.
E XCEPT AS SPECIFIED HEREIN , S ENSORAY MAKES NO
WARRANTIES , EXPRESS OR IMPLIED , AND SPECIFICALLY
DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE . C USTOMER ’ S
RIGHT TO RECOVER DAMAGES CAUSED BY FAULT OR
NEGLIGENCE ON THE PART OF S ENSORAY SHALL BE
LIMITED TO THE AMOUNT THERETOFORE PAID BY THE
CUSTOMER . S ENSORAY WILL NOT BE LIABLE FOR
DAMAGES RESULTING FROM LOSS OF DATA , PROFITS , USE
OF PRODUCTS , OR INCIDENTAL OR CONSEQUENTIAL
DAMAGES , EVEN IF ADVISED OF THE POSSIBILITY
THEREOF .
1.2 Special Handling Instructions
Models 2518 and 2519 hardware assemblies contain
CMOS circuitry that is sensitive to Electrostatic
Discharge (ESD).
Special care should be taken in handling, transporting,
and installing the hardware assembly to prevent ESD
damage. In particular:
q Do not remove the hardware assembly from its
protective anti-static bag until you are ready to
configure it for installation.
q
Handle the hardware assembly only at grounded,
ESD protected stations.
q
Remove power from the target system before
installing or removing the hardware assembly.