Seaward Apollo 500 - Manual (Page 2)

17. Environmental Conditions
18. Maintenance
18.1 Charging the battery pack.
18.2 Securing the Apollo 500
18.3 Cleaning the Apollo 500
18.4 Replacing the battery pack
19. Support
19.1 Registration
19.2Calibration
1. Limited Warranty & Limitation of Liability
SEAWARD Electronic Limited guarantees this product to be free from defects in material and workmanship under normal use and service for a period of 2 years (subject to
product registration) provided that the instrument is serviced and calibrated by a Seaward approved agent in accordance with the manufactures instructions. The period of
warranty will be effective at the day of delivery.
(c) Copyright 2013
All rights reserved. Nothing from this edition may be multiplied, or made public in any form or manner, either electronically, mechanically, by photocopying, recording, or in any
manner, without prior written consent from SEAWARD Electronic Limited. This also applies to accompanying drawings and diagrams.
Due to a policy of continuous development SEAWARD Electronic Limited reserves the right to alter the equipment specification and description outlined in this publication
without prior notice and no part of this publication shall be deemed to be part of any contract for the equipment unless specifically referred to as an inclusion within such
contract.
2. Disposal of old product
This product has been designed and manufactured with
high quality materials and components that can be
recycled and reused.
When this symbol is attached to a product it means the
product is covered by the European Directive 2002/96/EC.
Please familiarise yourself with the appropriate local separate collection system for electrical and electronic products.
Please dispose of this product according to local regulations. Do not dispose of this product along with normal waste material. The correct disposal of this product will help
prevent potential negative consequences for the environment and human health.
3. Certificate of Conformity
As the manufacturer of the apparatus listed, declare under our sole responsibility that the product:
Apollo 500
To which this declaration relates are in conformity with the relevant clauses of the following standards:
BS EN 61010-1:2010, BS EN 61010-1-030:2010, BS EN 61010-031:2008
Safety requirements for electrical equipment for measurement, control, and laboratory use.
BS EN 61557-1,-2,-4:2007 & -10:2001
Electrical safety in low voltage distribution systems up to 1000V a.c. and 1500V d.c. – Equipment for testing, measuring and monitoring of protective measures
BS EN 61326:2006
Electrical equipment for measurement, control and laboratory user-EMC Requirements
Performance: The instrument operates within specification when used under the conditions in the above standards EMC and Safety Standards.
The product identified above conforms to the requirements of Council Directive 89/336/EEC and 73/23 EEC.
Seaward Electronic Ltd is registered under BS EN ISO9001:2000 Certificate No: Q05356.
4. User Notes
These operating instructions are intended for the use of adequately trained personnel.