beautypg.com

Component description – Scotsman MDT5N25 User Manual

Page 10

background image

COMPONENT DESCRIPTION

High Pressure Cut Out Switch: A manual reset

switch sensing the high side refrigeration pressure.

It is set to shut the machine off if the discharge

pressure should ever exceed 450 psig.
Evaporator: A vertical stainless steel tube,

refrigerated, and water filled. In it there is a

stainless steel auger.
Reservoir: Float operated, it maintains the water

level in the evaporator at a constant level, it also

contains the water level sensor.
Water Level Sensor: Senses if there is water in

the reservoir to make ice out of. Will shut the

machine off it there is none.
Ice Level Sensor: An electronic “eye”, it senses

the presence of ice in the

bottom of the ice discharge

chute. Operates to turn the ice

machine on and off

automatically as the level of ice

in the bin changes.
Drain Tube: When uncapped

and lowered, drains the

evaporator.
Condenser: Air or water

cooled, where the heat

removed in ice making is

discharged.

Ice Storage Bin Assembly: A

plastic lined, insulated cylinder

that receives, stores and

dispenses the ice. Fresh ice

enters at the top, and when the

bin is full enough the ice will be

between the ice level sensors,

and the ice making will stop. Ice

is dispensed through a chute at

the bottom front when the bin

vane sweeps the ice over the

chute.

MDT5N25 & MDT5N40

May 2001

Page 10

ICE LEVEL SENSORS

WATER LEVEL

SENSOR

RESERVOIR

EVAPORATOR

ICE STORAGE BIN

TOUCH FREE SENSOR

CONDENSER

DRAIN TUBE

HIGH PRESSURE

CUT OUT

This manual is related to the following products: