Scotsman CS0415 - Manual (Page 27)

7. Leak in the recirculation system
a. return tube in reservoir
b. leak in tubing or distributor causing water to spray into the bin , not flowing down the evap plate
c. tube fully seated at motor and distributor
d. distributor attached to the evap , not loose causing water spray.
8. Hot gas valve
a. plugged in
b. verify in diagnostics run frost pattern less than 8 minutes, switch to mock harvest should
remove heavy frost in under 2 minutes.
c. sealed system leak or restriction in hot gas tubing ( harvest cycle)
9. Water level sensor
a. fully seated in the bracket
b. check functionality in diagnostics