Denon AVR-987 User Manual
Page 43
Advanced Operation
Advanced Operation
39
Playing the iPod
®
iPod is a trademark of Apple Computer, Inc.,
registered in the U.S. and other countries.
If the screens above are not displayed, the iPod may not be
properly connected. Check the connections and settings.
(iPod screen)
With the iPod, non-copyrighted contents and contents that
may be legally reproduced or played may be reproduced and
played by individuals for their personal use. Violating
copyrights is prohibited by law.
NOTE:
• DENON will accept no responsibility whatsoever for loss or
damage of data on an iPod occurring when the iPod is used
connected to the AVR-987.
• Some of the functions may not operate, depending on the
type of iPod and the software version.
Listening to music
Press
D
D H
H
to select the music file, then press
ENTER
or
G
G
.
Press
F
F to return to the music menu screen.
Press
ENTER
or
G
G
.
• Playback starts.
Manual search:
Press and hold in
D
D H
H during playback.
•
D
D : Fast reverse
•
H
H : Fast forward
Track search:
Press
D
D H
H during playback.
•
D
D : Move to beginning of previous track
•
H
H : Move to beginning of next track
Repeat play:
Press [MODE].
The mode switches as follows each time [MODE] is pressed.
• RPT One: Single track repeat
• RPT All : All track repeat
Shuffle play:
Press [MEMORY].
The mode switches as follows each time [MEMORY] is
pressed.
• SFL Songs : Single track shuffle
• SFL Albums: Album shuffle
Pause:
Press ENTER during playback.
Press again to resume.
Stop:
Press ENTER for at least 2 seconds during playback.
The mode switches between the Browse mode and the
Remote mode if [MODE] is pressed for at least 2 seconds.
In the Remote mode, only
D
D H
H F
F G
G and ENTER can be used.
1
2
• When
display switches between the title name, artist name and
album name.
• Depending on the iPod’s software version, it may not be
possible to operate the iPod from the AVR-987. Use the latest
version of the software. Information on the latest version of the
software can be obtained on the Apple Computer website.
• If you do not want the on screen display to be displayed while
playing the iPod, set “Function/Mode Status” at “Setting the
On Screen Display” to “OFF” (
page 52).
• With the AVR-987 it is possible to display folder names and file
names on the screen like titles. The AVR-987 can display up to
64 characters, consisting of numbers, capital letters and small
letters. A “?” mark is displayed in place of non-compatible
characters.
Viewing still pictures and videos
(only for iPods equipped with the slideshow /
video function)
Press
[MODE]
for at least 2 seconds to switch
from the Browse mode to the Remote mode.
• “Remote iPod” is displayed on the AVR-987’s display.
Watching the iPod’s screen, press
D
D H
H
to select
“Photos” or “Video”, then press
ENTER
or
G
G
.
• The iPod’s photo and video data are displayed on the
monitor.
Use this procedure to view photo and video data stored on the
iPod on a monitor.
Disconnecting the iPod
Press
and set the AVR-987’s power
to the standby mode.
The iPod can be disconnected after switching to a function
other than the one to which the iPod input is assigned.
1
2
Connect the AVR-987 and iPod using the DENON
original Control Dock for iPod (
page 21).
1
Use
FUNCTION
to select the function assigned in
step 2.
3
Assign the input terminal at “Setting the iPod
Assignment” (
page 47).
2
• The optional standard Control Dock for iPod is DENON ASD-1R
sold separately.
The music recorded on the iPod can be played when using a
DENON original Control Dock for iPod (ASD-1R). The iPod can be
controlled using the buttons on the main unit and the remote
control unit.
• To output photo or video data recorded on the iPod to the
monitor, the iPod’s “TV Out” setting (under “Video Settings”)
must be set to “ON”.
For details, refer to the iPod’s operating instructions.