Denon AVR-987 - Manual (Page 41)

37
Basic Operation Basic Operation
Checking the XM signal strength and Radio ID
X M 0 0 0 R A D I O I D
Radio ID
Either turn or press [TUNER] to
select “TUNER”.
Press until “SIGNAL” is displayed.
• The display changes as shown below according to the
receiving condition.
Press [BAND] to select “XM”.
1
2
3
Adjust the antenna location until
“SIGNAL:GOOD” is displayed. 4
Press until the XM channel
(ex.XM001) is displayed.
5
Press [TUNING –] to select channel 0 (XM000). 6
Category search
C A T E G O R Y S E A R C H
X M 0 4 0 D e e p T r k s
C A T : R o c k
X M 0 4 0 D e e p T r k s
Channel Category
• “LOADING” is displayed while receiving the channel or
information.
• “UPDATING” is displayed while updating encryption code.
• When the selected channel is not available, “XM– – –” is
displayed.
• Information on the artist name, song title, category and signal
level can be checked using .
• The XM Satellite Radio channels can be preset in the same way
as AM/FM band ( page 35).
3
Channel selection
X M 0 4 0 D e e p T r k s
Song title/Artist name
Channel name
Channel number
Press [TUNING] to reach the desired channel.
The channel changes continuously when you press and hold
[TUNING].
When the artist name and song title are received, they are
displayed.
3
Either turn or press [TUNER] to
select “TUNER”.
Press [BAND] to select “XM”.
1
2
Press F F G G to select the category, and press D D H H
to select the channel within the selected category.
2
Press F F G G in the XM mode.
• The current category name is displayed.
1
Condition Display
NO
GOOD Signal strength is good
MARGINAL Signal strength is marginal
WEAK Signal strength is poor
Loss of the signal