Scotsman SCV32 - Manual (Page 8)

Load It
The six racks are designed to hold five bottles
each with the necks pointing at each other. Two
additional bottles may be placed on the bottom for
a total of 32. If large bottles do not fit between the
racks, remove a lower rack and place the bottles
on the rack below. The racks are removable and reversible. To
remove a rack, take off the bottles on that rack and
pull it out until it stops, then lift up the front of the
rack and remove it from the unit.
Bottles can be arranged to suit individual needs.
Reversing every other rack allows more light to
penetrate the lower racks for an improved display
of a full cabinet.
Note: Rack removal will be difficult if the door
cannot open to at least 115
o
, as in a corner
application.
SCV32
June 2003
Page 7
Caution: Loaded racks contain heavy wine
bottles and when several are pulled out the
unit can tip forward unexpectedly.