Scotsman SCV32 - Manual (Page 3)

Install It
The SCV32 is designed to be installed indoors, in a
controlled environment. The operational limits are:
·
Voltage: 104 to 126 VAC 60 Hz
·
Room Temperature: 50 to 100
o
F.
The vents at the bottom front must be kept clear of
obstructions. Blocking these vents will reduce the
ability of the unit to keep the wine at the proper
temperature, and may damage the refrigeration
system.
The unit should be on its own electrical circuit and
no extension cords can be used. It pulls 1.1 amps
or between 100 and 160 watts when operating.
Wine bottles are heavy. A fully loaded unit will
weigh up to 200 lb. Be sure the flooring is
adequate for the weight.
Remove any tape or other packaging material from
inside the unit. Check that all racks move freely.
Note: Door handle is for opening door only. Do
NOT pick the unit up by the handle.
SCV32
June 2003
Page 2
Vents
Racks
Model Basic Dimensions* Compressor Condenser Basic Electrical Refrigerant
Charge
SCV32-1SB 15” w x 33 3/8” h x 21” d 1/16 HP Forced Draft 115 volts, 60 Hz, Single Phase 2.75 oz R-134a
* Width does not include clearance for built ins (extra 1/8” each side recommended), Height does not
include hinge, Depth does not include door. See the drawing on the next page for more detail.
Serial Number
Plate
Note: Due to possible door contact
with another cabinet, corner
installations may limit rack removal.