D-Link DSL 2740B - Manual (Page 64)

54
To designate a DMZ IP address, type in the IP Address of the server or device on your LAN in the DMZ Host IP
Address box, and click the Save Settings button. To remove DMZ status from the designated IP address, clear the IP
address in the box and click the Save Settings button.
OUTGOING IP FILTER
By default, all outgoing packets are allowed. But you can block specific type of packets from local hosts to Internet by
setting up outgoing IP filter.
1. Click the Add A Rule button to enter your outgoing IP filter configuration window.
2. Enter the filter name and at least one of the following criteria: Protocol, Source/Destination IP Address, and
Source/Destination Port.
3. Click Add A Rules button to apply settings.