D-Link DSL 2740B - Manual (Page 55)

45
Notice Wlreless Bridge function is available only when 802.11n is disabled. Please go to
ADVANCED WLAN page to disable 802.11n before configuring Wireless Bridge.
1. Select AP Mode from the drop-down list.
2. Select Enabled in Bridge Restrict drop-down list and enter the MAC address of the AP which to be bridged.
Or,
3. Select Enabled(Scan) in Bridge Restrict drop-down list and the Router starts to search and displays available
APs. Click the specific AP check box.
4. Click the Save Settings button to apply settings.
WLAN BRIDGE Window