Satel ETHM-1 - Manual (Page 9)

SATEL 2014-04-02
0x8F get event text + 2 bytes (high,low) - decode event code to text description:
.15 - 0 = short, 1 = long text description
11 lsb - event code (i.e. RCCcccccccc bits as in 0x8C command)
Function result - 22 or 52 bytes (depends on selection of short/long format) as follows:
1 byte
- 0x8F
2 bytes - two bytes used to call this function
1 byte - kind of long description (see Appendix 2)
2 bytes - kind of short description (see Appendix 3)
16 or 46 bytes - event text
0x90 zones isolate data structure as in 0x86
If function is accepted, function result can be checked by observe the system state
0x91 outputs switch data structure as in 0x88
If function is accepted, function result can be checked by observe the system state
- 9 -