Satel ETHM-1 - Manual (Page 15)

SATEL 2014-04-02
0xEE read device name + 1 byte - device type to read:
0 - partition (1..32)
1 - zone (1..128), in INTEGRA 256 PLUS - up to 256
2 - user (1..255) (*)
3 - expander/LCD (129..192 - expander, 193..210 - LCD)
4 - output (1..128), in INTEGRA 256 PLUS - up to 256
5 - zone (1..128) with partition assignment (*), in INTEGRA 256 PLUS - up to 256
+ 1 byte - device number to read (send 0 instead of 256 in INTEGRA 256 PLUS)
Function result - 20 bytes (* or 21 bytes):
1 byte
- 0xEE
1 byte - device type - see above
1 byte - device number - see above
1 byte - device type/function:
if partition - partition type - see e.g. DloadX for partition types list
if zone - zone reaction - see e.g. DloadX for zone reactions list
if user - 0
if expander - expander type:
1 - CA-64 PP
2 - CA-64 E
3 - CA-64 O
4 - CA-64 EPS
5 - CA-64 OPS
6 - CA-64 ADR
7 - INT-ORS
8 - INT-S/SK
9 - INT-SZ/SZK
10 - CA-64 DR
11 - CA-64 SR
12 - ACU-100
13 - INT-IORS
14 - CA-64 Ei
15 - CA-64 SM
16 - INT-AV
17 - INT-IT
18 - CA-64 EPSi
19 - INT-SCR
20 - INT-ENT
21 - INT-RX
22 - INT-TXM
23 - INT-VG
24 - INT-KNX
if LCD - 'LCD' type:
1 - INT-KLCD
2 - INT-KLCDR
3 - INT-PTSA
4 - INT-RS
5 - ETHM-1
6 - INT-KSG
8 - INT-TSI
10 - INT-TSG
if output - output function - see e.g. DloadX for output functions list
16 bytes - device name
1 byte - partition number (1..32) the zone is assigned to (this 21st byte appears only
if it is device type to read number 5 (*)
1 byte - user serial number (0..31) + 128 (this 21st byte appears only if it is device type
to read number 2 (*)
- 15 -