Denon RCD-M37 - Manual (Page 36)

ENGLISH
Get
ting Star
ted
Connections
Remo
ving the Speak
er Net
Specifications
Other Cautions
Cleaning
• Use a wiping cloth and wipe lightly to remove dirt from the cabinet
and operation panel.
※
When using chemically treated cloths, follow the precautions that
have been written for them.
• Do not use benzene, thinners, or other organic solvents or insecticides
on the main unit since they may cause a change in quality or color.
• Raising the amplifier’s volume excessively and playing with distorted
sound could damage the amplifier and speakers. Enjoy the sound at
a reasonable volume level.
• When moving the unit, note that applying strong force to the surface
of the speaker through the saran net could damage the speaker.
ENGLISH
Get
ting Star
ted
Connections
When installing on a desktop or in the corner of your room, the bass
may emphasized. Insert sound foam plug in the bass-reflex duct at the
back of the SC-M37.
You can adjust the bass sound with the amount of sound foam plug
you insert.
Acoustic Sponge How to Install
CAUTION
• Do not insert the foam plug too deep. The foam plug could fall in and
get stuck inside.
• If the foam plug cannot be removed or falls inside, stop using the
unit immediately and consult your store of purchase or your nearest
repair and inquiry center.
[Bottom]
Anti-slip pads
Foam plug
Attach four of the included anti-slip pads to the bottom of the unit as
shown on the diagram below.
2