Tuner playback – Denon RCD-M37 User Manual
Page 21
Get
ting Star
ted
Connections
Set
up
Set
ting the
Timer
Other F
unctions
Tr
oubleshooting
ENGLISH
Specifications
A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far from
the TV as possible.
Broadcast stations whose antenna signal are weak cannot be preset
automatically. If you wish to preset such stations, tune them in
manually.
Tuning in Broadcast Stations
Connect the antenna beforehand (vpage 10).
1
Press
[TUNER]
or
to select the reception
band.
FM MONO
AM
FM AUTO
G
About the displayH
When FM AUTO is selected∙∙∙∙∙∙∙∙∙∙∙∙∙∙“AUTO” is displayed.
When FM MONO is selected ∙∙∙∙∙∙∙∙∙∙∙“MONO” is displayed.
When AM is selected ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ The reception mode is not
displayed.
2
Use
<8/–
,
+/9
>
or
[TU –
,
TU +]
to select the
reception band.
When a station is received, the “TUNED” indication will light.
• If the function is set to something other than “TUNER”, press
[TUNER]
to switch the function to “TUNER” (vpage 24 “Auto
Function Selector Function”).
• The function can also be switched to “TUNER” using
SOURCE
.
n
To Tune Automatically
Press and hold in
<8/–, +/9>
or
[TU –, TU +]
to automatically
search and tune in broadcast stations.
b
Stations whose signal is weak cannot be tuned in.
n
To Stop Auto Tuning
Press
<8/–, +/9>
or
[TU –, TU +]
.
n
To Tune Manually
The reception frequency switches each time
<8/–, +/9>
or
[TU –, TU +]
is pressed.
About the FM Broadcast Reception Status Display
The “ST” indicator lights when receiving stereo broadcasts.
If the signal is weak and stable stereo reception is not possible, select
“FM MONO” to receive in monaural.
About Switching the Tuning Mode and Preset Mode
Use
<8/–, +/9>
to perform the tuning and preset channel
operations. Switch to the mode to be operated before operating.
n
To switch to the preset mode
Press
<+/9>
while pressing
.
The “PRESET” indicator flashes for about 5 seconds.
n
To switch to the tuning mode
Press
<8/–>
while pressing
.
The “TUNING” indicator flashes for about 5 seconds.
Automatically Presetting FM Stations
(Auto Preset)
Up to 40 stations can be preset.
Auto preset is not possible with AM broadcast stations.
n
To Cancel Auto Presetting
Press
>
or
[2]
.
The “Search” indicator turns off.
Presetting FM/AM Stations Manually
Up to 40 stations (total for AM and FM) can be preset.
1
Press
[TUNER]
to select “FM AUTO” or “FM
MONO”.
2
Press and hold in
MENU/SET
.
The “AUTO PRESET” is displayed.
3
Press
MENU/SET
again.
“Search” flashes and auto presetting starts.
1
Tune in the station.
2
Press
[ENTER/MEMO]
.
The smallest non-registered preset number flashes.
3
Use
<8/–
,
+/9>
,
[CH –
,
CH +]
or
[o p]
to select
the number, then press
[ENTER/MEMO]
.
The preset number, reception band and reception frequency are
displayed.
Pla
ybac
k
TUNER Playback