Denon RCD-M37 - Manual (Page 27)

Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Other F
unctions
Tr
oubleshooting
ENGLISH
Specifications
n To clear the timer settings
q Press MENU/SET .
The “TIMER” is displayed.
w Press 8 , 9 or [o p] .
The “EVERYDAY” or “ONCE” is displayed.
e While “EVERYDAY” or ”ONCE” is displayed, press 2> or
[2] for at least 2 seconds.
n To check the timer settings
q Press MENU/SET .
The “TIMER” is displayed.
w
Press 8 , 9 or [o p] .
The “EVERYDAY” or “ONCE” is displayed.
e
Press MENU/SET .
The display switches each time the button is pressed.
n To change the timer settings
Repeat the procedure under “Setting the Timer” (vpage 22).
n To change the setting while setting the timer
Press 2> or [2] .
Return to step 2 under “Setting the Timer” (vpage 22). Repeat
the procedure.
n If there is a power failure
The time setting and the timer settings are cleared. Reset the
current time, then reset the timer.
Sleep Timer Playback
Use this function to automatically switch the power to the
standby mode after a specific amount of time (minutes).
The sleep timer can be set to up to 90 minutes, in steps
of 10 minutes.
1 Select and play the desired function.
2
Press [SLEEP] and select the setting time.
90 80 70 60 50 40
20 10
30
The “SLEEP” indicator flashes.
3 Press [SLEEP] while the “SLEEP” indicator is
flashing.
The set time is displayed.
b After about 5 seconds, the set returns to as it was before the
sleep timer was set, and the “SLEEP” indicator lights.
OFF
(“SLEEP “ indicator turns off)
Set
ting the
Timer
n Checking the time remaining until the sleep timer
starts
Press [SLEEP] .
Return to step 2 under “Sleep Timer Playback”.
n Canceling the sleep timer
Either press [SLEEP] at step 2 under “Sleep Timer Playback” until
“OFF” is displayed, or press ON/STANDBY .
n To change the setting while the sleep timer is set
Press [SLEEP] .
13
Use 8 , 9 or [o p] to set the “minutes” for the
timer stop time.
14
Press MENU/SET or [ENTER/MEMO] .
The “minutes” for the timer stop time are set.
15
Use 8 , 9 or [o p] to turn timer playback on.
Display Once timer Everyday timer
1_off/E_off OFF OFF
1_on/E_on ON ON
1_off/E_on OFF ON
1_on/E_off ON OFF
b When turned on, “ ” lights.
16
Press MENU/SET or [ENTER/MEMO] .
The timer setting is set.
17
Adjust the volume for when the timer starts using
VOLUME .
18
Set the power to standby.
The timer playback standby mode is set.
E OFF AM12:00 E OFF AM12:00
1_OFF/E_ON 1_OFF/E_ON
n Canceling the timer
Press MENU/SET twice.
At step 15 under “Setting the Timer”, use 8 , 9 or [o p] to
turn off the timer on/off indicator and turn off “ ”.
When the function is set to iPod, the timer cannot be set. To set the
timer, first switch to a function other than iPod.
n When performing a timer setting with DENON
control dock for iPod (ASD-3N or ASD-3W)
Pause the track you want to play, and keep the power on for DENON
control dock for iPod.