Dolby Laboratories Multichannel Audio Tool DP570 - Manual (Page 87)

Rear-Panel Remote
Dolby ® DP570 Multichannel Audio Tool User’s Manual 71
B.8 Rear-Panel Remote
This is a 9‐pin female RS‐485 D‐connector. The pinout is SMPTE 207M
electrical/mechanical specification compatible.
B.9 10Base-T Port (Ethernet)
The Ethernet port is a standard RJ‐45 female jack provided for future use. Ethernet
communication is not currently supported.
B.10 Multichannel Analog Output
This is a 25‐pin female D‐connector. Its pinout is similar to a Tascam DA‐88 connector
except that output channels are referring to speakers instead of channel numbers.
7 RX B asynchronous data in +
8 TX A asynchronous data out –
9 Shield
Table B-4 Rear-Panel Remote Port Pinout
Pin Connection
1 Shield
2 TX B asynchronous data out –
3 RX A asynchronous data in +
4 Ground
5 NC
6 Ground
7 TX A asynchronous data out +
8 RX B asynchronous data in –
9 Shield
Table B-5 Multichannel Analog Output Pinout
Pin Connection Pin Connection
1 Bsr + Out 14 Bsr – Out
2 Bsr Ground 15 Bsl + Out
3 Bsl – Out 16 Bsl Ground
4 Rs + Out 17 Rs – Out
5 Rs Ground 18 Ls + Out
6 Ls – Out 19 Ls Ground
Table B-3 Metadata Output Port Pinout <~Figure>(continued)
Pin Connection