RGBLink VSP 5360 - Manual (Page 9)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
8
How to Add or Clear the Layer
Push any button of A, B, C, D in LAYERS area, or push all the 4 buttons, the button light is on, it means
the layer is selected, and add layer finished.
In LAYERS area, push any key of button A, B, C, D that need to clear, the button light flashes. Push the
button again, key light is off, and clear layer finished.
How to Set the Size and Position of the Image
Push the [Scale/Position] button, and enter the scale function menus. The lights of number button 0~9
are on, user can adjust the following items by knob or number buttons.
H SIZE: Width setting.
V SIZE: Height setting.
H POS: Horizontal phase setting.
V POS: Vertical phase setting.
RESET: If image quality distorts by improper operation, it can be recover by reset.
How to Crop the Image
Push the [Crop/Zoom] button, the button light is on and open the crop function. The lights of number
button 0~9 are on, user can crop H LEFT, V UP, H RIGHT, V DOWN of the image by knob or number
buttons.
If image quality distorts by improper operation, it can be recover by reset.