How to realize the text overlay setting, How to save the parameter – RGBLink VSP 5360 User Manual
Page 13
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
12
How to Realize the Text Overlay Setting
Before setting the text overlay, please make sure the input channel of the text. For example, choose
DVI3, the operations are as follows:
1. Push [DVI3] button, and make sure there is input signal, and OLED shows DVI3 signal.
2. Set the size and position of DVI3: Push the [DVI3] button in PRE area, the button light is on, and the
image can be edited, push the [Scale/Position] button to set the size.
3. Choose the input signal that will overlay in PRE area.
4. Push the [DSK] button, and open the DSK function.
Turn the knob and choose
for example, WhOnBk2, push the knob to confirm.
5. Push the [SAVE] button, and save the above settings.
Push the [SAVE] button, the button light is on, and enable the SAVE function.
Some of the buttons 0-12 in PRE area are on, and some flash. The buttons on can be saved, and flash
will be overwrite. Push the button on to save.
User can also push the [MENU] button to enter the menu item, and choose
knob and choose
mode.