RGBLink MSP 217 User Manual - Manual (Page 27)

2. Operation Manual
MSP 217 Fiber to SDI
MSP 217 User Manual 27
MSP 217 Fiber to SDI
Function Block Diagram
Operating Principle
MSP 217 Fiber to SDI receiver is connected to television (monitor) or
other device which has SDI interface.
Connect the fiber interface to the other fiber interface on MSP 217 SDI to
Fiber transmitter with fiber cable, and then connect the SDI interface on
MSP 217 Fiber to SDI panel to display device.
In order to avoid damaging the device, please use the standard power
adapter.