RGBLink MSP 217 User Manual - Manual (Page 19)

1. Brief Introduction
System Overview
MSP 217 User Manual 19
System Overview
MSP 217 SDI Extender is consisted of SDI transmitter（MSP 217 TX
SDI to Fiber）and SDI receiver （MSP 217 RX Fiber to SDI）, SDI signal
is realized by a single core mode fiber. And SDI digital video signal has
to fulfill the long distance transmission during the multimedia application
System. But when you use an ordinary cable for long distance
transmission, it will always show the poor output signal, be easy of the
interference, the mage displayed appears the phenomenon of the
vague, the tailing and color separation etc. At the same time, the
distance of transmission is short, it can not meet the requirement of long
distance transmission for the multimedia information issuing and so on,
using the MSP 217 SDI Extender for transmitting, this kind of problem
has been completely solved. The distance of transmission is10km in
single mode. In the mean while, the SDI Extender has the outstanding
points with a little attenuation, high frequency bandwidth, strong
anti-interference, high safety performance, small volume and light in
weight etc., therefore, it has incomparable advantages in the respect of
the special environment and the long distance transmission. It is used in
the multimedia system, which save the construction cost and easy for
cable arrangement, and the target of high quality performance is also
guaranteed.
MSP 217 TX SDI to Fiber is the transmitter, and MSP 217 RX Fiber to
SDI is the receiver, the two devices are used together, it can be realized
The long distance transmission of SDI signal by MSP 217 SDI to Fiber
With fiber optical cable to MSP 217 Fiber to SDI. This is especially
suitable for the high definition video signal transmission in the train
platform and the military practice.