RGBLink Driver Quick Start - Manual (Page 9)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
8
How to Cascade the Device
1. First, make sure the device is in normal operation.
2. Connect the male port of DB9 serial line to the female port of Device 1, and connect the
female port of DB9 serial line to the male port of Device 2, then Device 1 and Device 2
cascade is finished.
3. Same as above, cascade Device 2 and Device 3, Device 3 and Device 4.
Currently, it can cascade 4 sets of device, it is only available for Linsn sending card currently.
Note
DB9 serial male port DB9 serial female port