beautypg.com

Product introduction, System connection – RGBLink Driver Quick Start User Manual

Page 3

background image

Address:S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C

Tel: 00865925771197 Fax:00865925771202

Email: [email protected] http://www.rgblink.cn

2

Product Introduction

Driver controller is the only piece of equipment

between the video source and LED screen. The

device takes a digital video (DVI) input and

converts it so it can be sent over a single CAT-5

(RJ45) cable to the tiles. Compare with normal

RJ45 connector, Driver use Ethercon soft-patched

connectors to make sure lock connection and

better protection for the CAT5 cable.

If using good quality cable, distances up to 100

meters (300 feet) are easily achievable without

the need for any signal booster. A single Driver

can drive up to 1280*1024 (2048*640)

resolution (up to 142 pcs P6 tiles).

Driver is ready for cascade up to two pcs

controller with push button settings, and support

much higher resolution application. The

mapping of each tile is also programmed with

this controller, using a user friendly PC

application.

System Connection

RGBlink offers solutions to

demanding technical problems.

Any application questions, or

required further information,

please contact with our

customer Support Engineers.

Driver Controller System Connection Diagram