RGBLink VSP 168S Quick Start - Manual (Page 9)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
8
How to Set up the PIP
Enable the PIP function, the operations are as follows:
1. Push [MENU] button to enter the menu items.
2. Turn the knob and choose .
3. Push the knob to confirm, turn the knob again, choose .
4. Push the knob to confirm, turn the knob, choose ON and confirm, then start PIP mode.
LAYOUT: Can choose PIP layout, the corresponding results are as follows:
PIP L+T PBP L+R PBP T+B
SWAP IMAGE: It can set PIP to swap exchange, when choose ON, it can realize the IMAGE A and
IMAGE B exchange.
ALPHA: Can set the image transparency, the regulating range is among 0 to 16.
SELECT: Can choose to set the size or position of IMAGE A or IMAGE B Individually