RGBLink VSP 168S Quick Start - Manual (Page 16)

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
15
Project 1: Format conversion the front-end signal source with VSP 168S/1#, connect DVI output
interface to the HDMI input interface of VSP 168S/2#, and output to the next VSP 168S by HDMI loop.
The same method, connect the other VSP 168S for cascade. The quantity of VSP 168S depends on the
size of LED display.
Project 2: Format conversion the front-end signal source with VSP 168S/1#, and set PIP mode, output
to the HDMI input interface of VSP 168S/2#, then output to the next VSP 168S by HDMI loop. The same
method, connect the other VSP 168S for PIP cascade. The quantity of VSP 168S depends on the size
of LED display.
Here we use 4 sets of VSP 168S for cascade, the split modes includes “FIELD GLYPH”, “HORIZONTAL
1/4”, “VERTICAL 1/4” and “IRREGULAR”.