How to realize the text overlay setting – RGBLink VSP 168S Quick Start User Manual

Page 13

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C

Tel: 00865925771197 Fax:00865925771202

Email: [email protected] http://www.rgblink.cn

2. Turn the knob, choose and enter , push the knob to confirm.

3. Turn the knob, choose mode, choose ON, TEXT OVERLAY function open.

4. Push MENU, return to , turn the knob, LCD display shows menu options, select

13 modes in , or select , which includes two modes:

Mode 1: Graphic content locate at the top and is non-transparent, background transparency is

controlled by double-picture transparency.

Mode 2: Graphic content is controlled by double-picture transparency, the background is completely

transparent. Turn the knob and choose the mode.

5. Push the [MENU] button, return to , turn the knob, choose ABOVE/BELOW to

select the layer position for IMAGE B.

6. Push the [MENU] button, return to , turn the knob, choose BLEND LEVEL, and

set the image display transparency, regulating range between 0~16.

7. Push the [MENU] button, return to , turn the knob, choose the color value:

RED: The value range of color RED that to be set, regulating range between 0~255.

GREEN: The value range of color GREEN that to be set, regulating range between 0~255.

BLUE: The value range of color BLUE that to be set, regulating range between 0~255.

8. At the same time, user can view the effect through the screen, to get a better setting.

Note: All the above settings are available only for IMAGE B.

This manual is related to the following products: