Remotec ZXT-120 V0.5 - Manual (Page 9)

9
ZXT-120 Information
How to get the NIF “Node Information Frame” on ZXT-120
Step Setup Key
LED Indication
Status on ZXT-120
1
Press the PROG button on
the ZXT-120
• LED flashes once
then stay off
(ZXT-120 will report
the supported
command class)
Parameter No. and Parameter Value of configuration command
Parameter
Number
Definitions
Parameter Value
25
(0x19)
Indicate a location for IR
code learning and start
learning 1-20
(0x00 – 0x14)
26
(0x1A)
Learning status register
Note:
The status value 0x01 and
0x04 will be reset to 0
when the ZXT-120 receive
a get command to this
parameter 0x00: Idle - this IR
channel is idle
(default)
0x01: OK - the latest
learning process
successful and
completed
0x02: Learning - the
ZXT-120 is busy
processing previous
learning request
0x04: Failed - the
latest learning request
failed
27
(0x1B)
IR code number for built-
in code library
Refer “Code list” for
details
28
(0x1C)
External IR Emitter power
level
0x00: normal power
mode
0xFF: high power
mode (default)
32
(0x20)
Surround IR control
-
to avoid the IR
interference by disabling
the surrounding IR
emitter if 2 air-
conditioners in a room
0x00: disable
Surround IR Emitters
0xFF: enable
Surround IR Emitters
(default)