Remotec ZXT-120 V0.5 - Manual (Page 15)

15
1. Obtain two screws suitable for the wall strength and material. The
screw size is shown in the figure below.
2. The positional relationship between the ZXT-120 key holes and
the screw mounting positions are shown in the figure below.
Note 1: When mounting the screws to the wall, leave a space
between the wall and screw cap as shown in the figure.
3.
Insert the ZXT-120 key holes onto the two screws mounted to the
wall, and then slide downward to secure in place.
4.
After securing the ZXT-120 to the wall, connect the USB Power
or batteries and IR emitter cable to the ZXT-120.
Note 1: Check that the ZXT-120 is firmly secured to the wall.
Note 2: Insert USB plug or batteries and IR emitter cable so that
they are firmly connected to the ZXT-120.