Remotec ZXT-120 V0.5 - Manual (Page 14)

14
INSTALLATION
MOUNTING THE ZXT-120 TO A WALL
MOUNTING LOCATION PRECAUTIONS
• Before mounting, check the material and structure of the mounting
location. If the location does not have the proper material or
structure, the ZXT-120 can fall and cause injuries.
• Use commercial items that best match the wall structure and
material for the screws and other fixtures.
• Do not mount near a kitchen counter, humidifier, or other location
in which it can be exposed to smoke or steam. Doing so could
cause a fire or electrical shock.
• Do not mount in locations with high humidity or large amounts of
dust. Doing so could cause a fire or electrical shock.
• Do not mount to locations subject to high temperatures, high
humidity, or exposure to water. Doing so could cause a fire or
electrical shock.
• Do not mount to locations subject to large amounts of vibration,
large jolts, or large forces. These could cause an injury if the ZXT-
120 falls and breaks.
MOUNTING PROCEDURE PRECAUTIONS
• Do not modify parts or use the ZXT-120 in ways other than its
intended use. Doing so could cause the ZXT-120 to fall and result
in an injury.
• Be sure to fully check that there are no electrical wires or pipes
inside the wall before mounting.
• If any of the screws are loose, the ZXT-120 can fall and cause an
injury. Do not mount the ZXT-120 with the screws still loose.
• Check that the two screws mounted to the wall are fully inserted
into the key holes of the ZXT-120. Otherwise, the ZXT-120 can
fall and cause an injury.
• Do not mount the ZXT-120 so that it sticks out from the wall edge.
It could get hit by people’s bodies or objects and cause an injury.
• Supplier will not be liable for any accidents or injuries that occur
due to improper mounting or handling.
• When mounting, be careful not to get your fingers pinched or
injure your hands.
MOUNTING PROCEDURE
The ZXT-120 can be mounted to a wall or wooden racks using the two
key holes in the bottom case.
Note 1: The reception sensitivity varies depending on the antenna
direction.
Note 2: Before mounting to a wall, be sure to fully read the precautions.