Remotec ZRC-100 V1.53 - Manual (Page 52)

52
4
Use cb keys to select
the dead node device
then press key to
delete it from network.
⇓
Note 1: Only the Primary Controller can be used to include or delete
devices from a network. It is recommended that you mark the primary
controller for each network for ease in modifying your network.
Listening Mode
There are multiple usages by entering this mode:
• Version command class: To get application software version, the
Z‐Wave protocol version and the supported Z‐Wave command
version of this controller.
• Manufacturer command class: To get the manufacture ID,
product type ID and the product ID of this controller.
• Scene configuration command class: Home gateway can bundle a
scene ID to a group ID using this command.
• Association command class: To create and maintain associations
in this remote.
Step Setup Key LCD Indication
1
Place the two controllers
close to each other.
‐
2
Press and hold cb keys
simultaneously for 3
seconds under the
Home page.
Home
Device >
Scene >
Comfort >
OK to Enter
Dead Node
Dimmer 002
OK to Delete
Dead Node
OK