Remotec ZRC-100 V1.53 - Manual (Page 5)

5
Glossary
Device or Node
Devices and nodes are all terms to describe
an individual Z­Wave device. These are all
interchangeable when setting up your Z‐
Wave network.
Inclusion Add a Z‐Wave device to the network.
Exclusion Delete a Z‐Wave device from the network.
Remove
To take a device out of a group, scene or
association group while that device still
exists in the same Z‐Wave network.
Z‐Wave
Network
A collection of Z‐Wave devices controlled by
primary and secondary controllers operating
on the same system. A Z‐Wave network has
its own unique ID code so that controllers
not in the network cannot control the
system.
Primary
Controller
The first controller used to set up your
devices and network. Only the Primary
Controller can be used to include or delete
modules from a network. It is recommended
that you mark the primary controller for
each network for ease in modifying your
network.
Secondary
Controller
A controller containing network information
about other modules within the network
and is used for controlling devices.
Secondary controller is created from the
Primary Controller and cannot include or
delete modules to the network.
Inclusion
Controller
A controller containing network information
about other modules within the network
and is used for controlling devices. Inclusion
controller is created from the Primary
Controller in a SIS enabled Z‐Wave network.
Inclusion Controller has the ability to add
and remove devices from the network.
Scene
A collection of Z‐Wave devices configured to
turn to a specific level, setting, mode, or
perform an operation. Scenes are usually
activated by a controller, timed event, or
specific conditions.