Remotec ZRC-100 V1.53 - Manual (Page 31)

31
6
Use cdkeys to change
your parameter number
and ef keys to select
number position, press
to save the
setting.
7
Use cdkeys to change
your parameter value
and ef keys to select
number position, press
to save the
setting.
(Parameter value from ‐
0 to 255)
8
Press key to send
out predefined
parameter number and
value to your
destination device (e.g.
gateway) and trigger the
event.
Repeat the above steps
to setup F2 and F3 key.
Home
Device >
Scene >
Comfort >
OK to Enter
Configuration
Parameter No (0-255)
000
OK to Save
Configuration
Parameter Value
+0000000000
OK to Save