REMKO SuperTec-Monitor - Manual (Page 17)

Setting on SW2 System component Measuring range and description Unit
Opening width of the LEV A
before fault
0 – 480
0 – 480
If the opening width is over 99
impulses, the display switches
between the 100s digit, the
10s and 1s digits,
and 2 spaces.
Example: 130 impulses:
Impulses
ON
1 2 3 4 5 6
Heat exchanger temperature
sensor of the outdoor unit TH6
(two-phase mixture)
before fault
-39 – 88
Line temperature of the
outdoor unit TH33 before fault
-39 – 88
Vaporiser/condenser tempera-
ture sensor of the indoor unit
TH5 before fault
-39 – 88
-39 – +88
If the temperature sensor
measures values below 0°C,
the display switches between
the sign, the value, and 2
spaces.
Ex-
ample: -15 °C:
-39 – +88
If the temperature sensor
measures values below 0°C,
the display switches between
the sign and the value.
-39 – +88
If the temperature sensor
measures values below 0°C,
the display switches between
the sign, the value,
and 2 spaces.
Example: -15 °C:
°C
°C
°C
ON
ON
ON
1
1
1
2
2
2
3
3
3
4
4
4
5
5
5
6
6
6
0.5 s 0.5 s 2 s
„ 1“ „30“ „ “
0.5 s 0.5 s 2 s
„- “ „15“ „ “
0.5 s 0.5 s 2 s
„- “ „15“ „ “
17