REMKO SuperTec-Monitor - Manual (Page 11)

Setting on SW2 System component Measuring range and description Unit
New fault message on the
outdoor unit (1)
The last message in the fault
list is deleted, and the remain-
ing messages are moved
down one.
Fault message "00" is not
moved „00“
Flashing: fault message will be
moved
Constant: movement cancelled
Fault code
ON
1 2 3 4 5 6
Operating mode before fault
stop
Line temperature TH3 before
fault
-40 – 90
Condenser or hot gas tempera-
ture
TH4 before fault
3 – 217
Code for operating mode be-
fore fault stop
Fault code is displayed if all
switches on DIP switch
SW2 are in the OFF position.
-40 – +90
If the temperature sensor
measures values below 0°C,
the display switches between
the sign, the value, and 2
spaces.
Ex-
ample: TH3 = -15°C:
3 – 217
If the temperature sensor
measures values above 99°C,
the display switches between
the 100s digit, 10s and 1s dig-
its, and 2 spaces.
Example: TH4 = 130°C:
0.5 s 0.5 s 2 s
„- “ „15“ „ “
0.5 s 0.5 s 2 s
„ 1“ „30“ „ “
°C
°C
ON
ON
1
1
2
2
3
3
4
4
5
5
ON
1 2 3 4 5 6
ON
1 2 3 4 5 6
6
6
11