DirecTV User Manual H20 User Manual

Page 86

program’s native resolution. Th

e FORMAT key allows you to easily cycle all resolution and format

settings with a single key until the picture displays the way you like it. Navigating menus to modify

settings is not necessary.

If pressing this key causes a loss of video and audio, continue to press it until the picture returns. (Wait a

second between presses to allow the Receiver to change the resolution.) Th

is can happen if your settings

include a resolution that your TV doesn’t support. To correct this, you’ll need to change your resolution

setting: Press MENU, select Settings, then Setup, then HDTV in the left side menu. Press SELECT on

the Resolution tab and mark or unmark the TV Resolutions to display the resolutions supported by your

television.

RESOLUTION Key on Receiver Front Panel

is key is used to cycle all available resolutions on your DIRECTV HD Receiver. It does not cycle

format settings. If video and audio are not appearing, it may be because the current resolution setting

is not supported by your television. By pressing this key, you can check all available resolutions to see if

that solves the problem. Th

e lights next to the RESOLUTION key on the front panel will light below

the resolution to which the receiver is set; they will change with each key press.

Resolution made
simple: Set
the resolution
to the highest
number that your
TV supports by
pressing the
RESOLUTION
key.