DirecTV User Manual H20 User Manual

Page 45

upgrades. Do not unplug your receiver while an upgrade is in progress. Please consult the System

Info screen to check for an upgrade or modiﬁ cation planned by DIRECTV.

DIRECTV HD Receiver or TV Problems

Progress bar freezes during Satellite Data Acquisition

is may be normal. After ﬁ ve minutes, the screen saver is displayed. Press any key on the remote

to see the progress bar again. If Satellite Data Acquisition still does not move forward, press the

RESET button behind the access panel door on the front of the DIRECTV HD Receiver and wait

for program guide information to be acquired.

Wrong picture, blue screen, snow or black/blank picture

e DIRECTV HD Receiver and most TVs and VCRs let you toggle between video sources. If you

don’t see the signal you think you should be seeing, try using these buttons to toggle between the

signals:

4 Press the TV/VCR button on the VCR remote or on the VCR’s front panel.

4 Press the TV INPUT button on the DIRECTV remote control.

If problems persist, turn oﬀ all equipment that is connected to your TV, wait a few minutes,

then turn the DIRECTV HD Receiver back on.

4 Check your connections and cables.

Having a
problem? Then
check the
following:

1. Cables and
connections

2. MODE switch
on your remote

3. Remote
batteries

4. TV Input

5. Power

Most problems
have simple
solutions.