REMKO CMF 320 Duo - Manual (Page 3)

Contents
Read these operating instructions carefully
before commissioning / using this device!
These instructions are an integral part of the system and must always
be kept near or on the device.
This operating manual is a translation of the German original.
Subject to modifications; No liability accepted for errors or misprints!
Safety notes 4
Environmental protection and recycling 5
Warranty 5
Care and maintenance 5
Temporary shut-down 5
Intended use 6
Heat pumps in general and layout 6-10
Layout of the Indoor unit 11
Installation instructions 12-16
Hydraulic connection 17
Corrosion protection 18
Electrical connection 19-22
Connection of refrigerant lines 23
Placing the refrigeration system in service 24
Control panel 25
Notes on commissioning 26
Setting instructions for indoor unit charge pump 27
Heat pump manager Multi-Talent Plus (heat flow meter) 28
Troubleshooting and customer service 29-32
Unit dimensions 33
Electrical system layout 34
Connection diagram: terminal configuration / circuit diagrams 35-44
Heat-output characteristics and COP 45-47
Pump characteristics and sound-pressure levels 48
Sound-power levels 49
Annual performance numbers (n. VDI 4650) 50-51
Technical data 52
Exploded view and parts lists 53-55
EC-Declaration of conformity 56
General terms 57-58
Made by REMKO
3