REMKO CMF-80 v.2 - Manual (Page 32)

REMKO CMF / CMT
Care and maintenance
Regular care and maintenance
ensuretrouble-free operation and a
long service life.
Care
■ The indoor and outdoor mod-
ules must be kept free of
soiling, vegetation and other
deposits.
■ The device is to be cleaned with
a damp cloth. In doing so, it
is to be ensured that no caus-
tic, abrasive or solvent-based
cleaning products are used. Use
of powerful water jets is to be
avoided.
■
The fi ns on the outdoor module
are to be cleaned after long
standstill periods.
Prior to performing any work,
ensure the equipment is iso-
lated from the voltage supply
and secured to prevent acci-
dental switch-on!
CAUTION
Maintenance
■ It is necessary to arrange a
maintenance contract on an
annual basis with a respective
specialist fi rm.
As the refrigerant fi ll quantity
exceeds 3kg, an
annual tight-
ness check has to be carried
out on the refrigerant circuit
by a specialist fi rm.
NOTE
Temporary decommis-
sioning
The system may not be switched
off at the mains power supply even
if the heating system is not used for
heating purposes over an extended
period (e.g. holidays)!
■ The system is to be switched to
"Stand-by" mode during tem-
porary shut-down periods.
■
Heating phases can be pro-
grammed for the duration of the
period of absence.
■ The previous operating mode
has to be switched back on
when the shut-down phase is
over.
■ Instructions on how to change
the mode is described in the
corresponding chapter of the
configuration manual.
Disposal of packaging
All products are packed for trans-
port in environmentally friendly
materials. Make a valuable con-
tribution to reducing waste and
sustaining raw materials. Only
dispose of packaging at approved
collection points.
In order to make warranty claims, it
is essential that the ordering party
or their representative complete
and return the "certificate of war-
ranty" and commissioning report
to REMKO GmbH & Co. KG at the
time when the equipment is pur-
chased and commissioned.
The warranty conditions are listed
in the "General business and deliv-
ery conditions. The contractual par-
ties can also agree additional terms
beyond the scope of the above. In
this case,first contact the contrac-
tual partner.
Environmental
protection and
recycling
Warranty
In "Standby" mode, the heat
pump is "switched off".
However, the frost protection
function of the entire plant
remains active.
NOTE
Disposal of units and compo-
nents
For the manufacture of the units
and components, only recyclable
materials have been used.
Help protect the environment by
ensuring that the units or compo-
nents (for example batteries) are
not disposed in household waste,
but only in accordance with local
regulations and in an environmen-
tally safe manner, e.g. through
authorised disposal and recycling
specialists or at collection points.
32