REMKO ETF 320 - Manual (Page 15)

15
Customer service
and warranty Intended use
Disposal of packaging
Think of the environment when
disposing of the packaging mate-
rial.
Our units are carefully packed for
transport and delivered in sturdy
cardboard packaging and if neces-
sary, on a wooden pallet.
The packaging materials are
environmentally-friendly and can
be recycled.
By recycling packaging material,
you make a valuable contribution
towards waste reduction and the
conservation of raw materials.
Only dispose of packaging mate-
rial at the facilities provided
.
A precondition for any warranty
claims is that the dealer or his cus-
tomer has completed and returned
the enclosed “Warranty docu-
ment” to R�MKO GmbH & Co.
KG at the time of sale and com-
missioning.
The units were repeatedly tested at
the factory for perfect functioning.
If problems should nonetheless
occur, which cannot be remedied
by troubleshooting by the opera-
tor, your specialised dealer or con-
tract partner should be contacted.
NOTE
Only authorised specialists
may make adjustments and
carry out maintenance work.
Environmental
protection and
recycling
Disposal of the old unit
This unit must not be disposed of
together with normal household
waste, but must be taken to a
special collection point for
recycling electrical and electronic
equipment.
The materials can be reused accor-
ding to their marking.
The reuse or recycling of materials
and old units makes an important
contribution towards protecting
the environment.
To find out about your nearest
disposal facilities, contact your
local authorities.
Important information
on recycling
The units are operated with
environmentally-friendly and
ozone neutral refrigerant R410a.
The refrigerant and oil mixture
contained in the unit must be
disposed of properly in accordance
with the statutory and locally
applicable regulations.
The units are designed and
equipped for drying and dehumidi-
fication purposes.
The units must not be used for any
other purposes.
The units must only be operated
by suitably trained persons who
are familiar with the operation of
the unit.
The manufacturer is not liable for
any damage attributed to failure
to observe the manufacturer‘s
instructions or applicable statu-
tory requirements or unauthorised
changes to the unit.
NOTE
Use/operation for any other
purpose than that described in
these operating instructions is
not permitted.
Non-observance will result in
all liability being disclaimed
and render warranty entitle-
ments null and void.
ATTENTION
Copyright
The copying of this docu-
ment in whole or part or use
for any other purpose than
that intended is not permit-
ted without the prior written
permission of
REMKO GmbH & Co. KG .