REMKO RVT 263 DC - Manual (Page 25)

Stop
On
10 hours later Set time
Fig. 26: "TIMER OFF" example
Combined TIMER (setting "TIMER ON" and
"TIMER OFF" at the same time)
"TIMER OFF ð "TIMER ON"
(On ð Stop ð Start)
This function is useful if you want the unit to switch
off automatically once you have gone to bed, then
to switch back on automatically when you get up or
come home.
Example:
You want the air conditioning unit to switch off in
two hours from the time it was programmed, and
switch back on ten hours later.
1. Press the "TIMER OFF" key.
2. Press the "TIMER OFF" key again until the
desired stop time is shown in the "TIMER
OFF" area on the remote control.
3. Press the "TIMER ON" key.
4. Press the "TIMER ON" key again until "10H"
is shown in the "TIMER ON" area on the
remote control.
5. Wait for 3 seconds and the temperature
appears again in this area of the digital dis-
play. The "TIMER ON" and "TIMER OFF"
indicators stay lit, and this function is acti-
vated.
On
Set time
Stop
Start
2 hours later
after setting
10 hours later
after setting
Fig. 27: "TIMER OFF" / "TIMER ON" example
"TIMER ON ð "TIMER OFF"
(Off ð Start ð Stop)
This function is useful if you want the unit to switch
on automatically before you wake up, then to
switch off again once you have left the house.
Example:
You want the air conditioning unit to switch on in
two hours from the time it was programmed, and
switch back off five hours later.
1. Press the "TIMER ON" key.
2. Press the "TIMER ON" key again until "2.0H"
is shown in the "TIMER ON" area on the
remote control.
3. Press the "TIMER OFF" key.
4. Press the "TIMER OFF" key again until
"5.0H" is shown in the "TIMER OFF" area on
the remote control.
5. Wait for 3 seconds and the temperature
appears again in this area of the digital dis-
play. The "TIMER ON" and "TIMER OFF"
indicators stay lit, and this function is acti-
vated.
Off
Set time
Stop
Start
2 hours later
after setting
5 hours later
after setting
Fig. 28: "TIMER ON" / "TIMER OFF" example
The timer settings ("TIMER ON" or "TIMER
OFF") which is made immediately after the set
time will be activated first.
SLEEP function
In this function, the unit automatically increases (in
cooling mode) or reduces (in heat mode) the tem-
perature in the first two hours by 1°C an hour. For
the next five hours, the temperature is them kept
constant. Then this function is stopped.
The function maintains the most comfortable tem-
perature while saving energy.
25