REMKO MXW 202 - Manual (Page 18)

"Follow me" function
If this function is selected, the room temperature is
detected by the remote control, rather than the
indoor unit. The temperature measured by the
remote control is then transmitted to the indoor unit
at certain intervals.
LED
FOLLOW ME
> 2 sec.
Fig. 17: "Follow me" function
"SLEEP" key
This key activates programming function, which
reduces the target temperature in cooling mode by
1°C after one hour and by 2°C after two hours. The
unit is switched off automatically after eight hours.
SLEEP
Fig. 18: "Sleep" key
"TIMER ON" key
This key enables a switched off unit to be
switched on in 30 minute intervals (half an
hour).
3 sec.
TIMER
ON
TIMER
ON
Fig. 19: "Timer On" key
REMKO MXW
18