REMKO RKL 491 DC - Manual (Page 8)

3 Structure and function
Equipment description
The device is particularly suited for flexible opera-
tion, but can also be mounted in a stationary instal-
lation. The local air conditioning unit is comprised
of an indoor unit for setting up on the floor indoors
and an outdoor unit for wall or ground installation
outdoors. In "cooling" mode, the output produced
by the compressor precisely matches itself to
requirements, and thereby regulates the nominal
temperature with minimal temperature deviations.
This "inverter-technology" results in energy savings
over conventional split systems and also reduces
noise emissions to a particularly low level. The
flexible connection pipe serves to transport the
heat outdoors. The outdoor unit discharges the
absorbed heat to the outdoor air by means of a
heat exchanger (condenser). The condensate col-
lected during cooling operation is transported to
the outdoor unit by means of a condensate pump
integrated into the indoor unit and evaporates via
the heat exchanger. The device filters and dehu-
midifies the air and thereby creates a comfortable
room climate. It works fully automatically and offers
numerous additional options thanks to its micro-
processor control system. The device can be con-
veniently operated by means of the infrared remote
control unit included.
2
1
4
3
5
6
7 8
LA
LA
LE
IG AT
LE
Fig. 1: Front view
IG Indoor unit
AT Outdoor unit
LA Air outlet
LE Air intake
1 Recessed grip
2 Infrared receiver
3 Ventilation louvers
4 Control panel
5 Carrying handle
6 Conveyor rollers
7 Connector pipes
8 Condenser fan (back side)
2
1
4
3
5
LE
2
6
Fig. 2: Rear view (indoor unit)
LE Air intake
1 Connector pipes
2 Mount for the outdoor unit
3 Cover
4 Air filter
5 Condensate drain
6 Mains lead with plug
REMKO RKL
8