Ravenheat CSI 85 - Manual (Page 8)

NOMINAL HEAT INPUT NET QMS 24.8 kW
MINIMUM HEAT INPUT NET 13.0 kW
NOMINAL HEAT OUTPUT 23.8 kW
NOMINAL HEAT OUTPUT CONDENSING 26.2 kW
MINIMUM HEAT OUTPUT 10.6 kW
MINIMUM HEAT OUTPUT CONDENSING 13.7 kW
GAS RATE max 2.5 m 3 /h
AFTER 10 MINUTES min 1.3 m 3 /h
INLET PRESSURE 20 mbar
BURNER PRESSURE C.H. max 10.5 mbar
min 2.0 mbar
MAIN BURNER INJECTORS Nr. 13 x 1.25
ELECTRICAL SUPPLY 230 V ~ 50 HZ
POWER CONSUMPTION 150 W
EXTERNAL FUSE RATING 3A
INTERNAL FUSE 3.15 A (20 mm to BS 4265)
DRY WEIGHT 46 kg
WATER CONTENT C.H. 2.1 litre
WATER CONTENT 0.5 litre
GAS SUPPLY CONNECTION 15 mm compression isolating valve
FLOW CONNECTION C.H. 22 mm compression isolating valve
RETURN CONNECTION C.H. 22 mm compression isolating valve
INLET CONNECTION D.H.W. 15 mm compression isolating valve
OUTLET CONNECTION D.H.W. 15 mm compression
SAFETY DISCHARGE C.H. 15 mm copper pipe
CONDENSATION DRAIN 3/4” (21.5 mm) push fi t over fl ow
MAX COLD WATER CAPACITY WITHOUT ADDITIONAL EXPANSION VESSEL 110 LITRE
SEALED WATER SYSTEM C.H.
MAX PRESSURE PHS
2.5 bar
MINIMUM WORKING PRESSURE 0.5 bar
7 LITRES EXPANSION VESSEL PRE-CHARGE-PRESSURE 0.5 bar
CENTRAL HEATING OPERATING TEMPERATURE MAX 85°C MIN 45°C
DESIGN FLOW RATE 1102 I/h 20 °C RISE
MINIMUM FLOW RATE C.H. 503 I/min
D.H.W. FLOW RATE 30 °C rise
13.2 l/min
D.H.W. FLOW RATE 35 °C rise 11.0 l/min
D.H.W. FLOW RATE 40 °C rise 9.2 l/min
D.H.W. TEMPERATURE max 65 °C min 35 °C
BURNER PRESSURE D.H.W. max 11.2 mbar min 2.5 mbar
Qmw Input Net max 26.0 kW min 13.0 kW
D.H.W. PRESSURE max 10 bar (147 p.s.i.)
D.H.W. PRESSURE PMW min 0.8 bar (118 p.s.i.) To obtain heat input 1.2 bar
D.H.W. MINIMUM FLOW RATE 3 I/min
FLUE OUTLET NOM. DIAMETER 100 mm specially supplied with boilers
DESTINATION: AT, DK, Fl, SE,
CATEGORY I
2H
DESTINATION: GB, IE, CH, ES, IT, PT CATEGORY II
2H3+
FLUE TYPE - C
12
- C
32
- C
52
NOX 4
SECTION 3 TECHNICAL DATA
CSI 85 (T) 780 Series
TABLE 1
NATURAL GAS (G 20)
І
2H
-
П
2H3+
8