PSE Archery Bow 2012 - Manual (Page 8)

8
Compound Bow
U S E R ’ S G U I D E
ViBracheck ™ hush kit accessOries
Limb Band on Solid Limb Cable Guard Damper
(Shown at full draw)
If your bow is equipped with a Cable Guard Damper it should be even with
the cable slide when the bow is at rest. More than one Cable Guard Damper
can be used.
If your solid limb bow is equipped with limb bands, the proper placement of the
bands is approximately 1/8” beyond the limb fork.
If your split limb bow is equipped with limb bands, the proper placement of the
bands is at least 1/4” away from the cam (align the band with the end of
the limb graphic).
Limb Band on Split Limb
pse asyMMetric iDler
PSE single cam bows are equipped with a
special asymmetric idler wheel, which is
assembled on the top limb. It is essential
that the idler be oriented properly.
The wide edge of the idler always goes
to the cable guard side of the bow.
The illustration shows the proper
orientation of the idler for a right-
handed bow when viewed while
holding the bow as it is shot.
Wide edge