Hydraulics – Progressive Turf Equipment TDR-22 1393176 and Above User Manual
Page 42
39
HYDRAULICS
The hydraulic system on your Progressive mower is a simple cylinder system
used to raise and lower the cutting decks into position. Each cylinder contains a
.035 diameter restrictor orifice, which is located on the rod end to slow the
speed of travel.
Restrictor Orifice
When reconnecting the quick disconnects to the tractor, be sure that both ends are
clean. Dirt in the hydraulic system can block the orifice in the line throttle valve or
even score the cylinder tubes.
Hydraulic fluid escaping under pressure has enough force to penetrate the skin. See
a doctor at once if injured by escaping fluid. During your daily inspection repair all
leaks before they create a major problem. Relieve all pressure before working on, or
disconnecting the line in the hydraulic system.
If crimp-on hose ends are ever changed, be sure they are compatible with the hose,
to provide the proper crimping pressure.
- TDR-15 0915001 to 1215106 TDR-15 1315107 - 1415136 TDR-15 1415137 and Above TDR-15 Up to 0867018(0867XXX Serials only) TDR-12 Up to 1212029 TDR-12 1412037 and Above TD 65-2 Serial 1365-21376 and Above TD 65 Serial 1365-21376 and Above TD 65-2 Serial Up to 1265-21375 TD 65 Serial Up to 1265-21375 TD 92 SDR-65 10365047 to 13365072 SDR-90 10365047 to 13365072 SDR-65 14365073 and Above SDR-90 14365073 and Above SDR 90 SDR65 TDR-12 1312030 - 1312036 TDR-22 Up to 1291175