Progressive Turf Equipment TDR-22 1393176 and Above - Manual (Page 10)

7
TDR-22 MACHINE SPECIFICATIONS
Cutting Width 22 feet
Cutting Height 1/2” to 4” Deck Flexibility 25” up, 15 degree down
Recommended HP 65 Min – 75Max 360 Degree Turn 0” Uncut Circle
Hydraulics Requires 1 double acting
outlet with float, all hoses
supplied to tractor
Numbers of
wheels
2 on main frame
Transport Width 94” Mowing Capacity MPH 2 4 6 7.5
Acres per hour 5.4 10.7 16 20
Assumes no stops or overlap.
Height 10’ 2” Paint Finish Electrostatically painted with oven
baked finish.
Length 17 ft. SMV Sign Located at back of mower for
safety
Ground Clearance 11” Cutting Weight Total 5820 lbs.
DECK FRAME
Drive PTO shaft to right angle gear box
driving (4) “B” section belts to 4
heavy-duty spindles. “A” Frame Hollow structural steel tubing with
supports at high stress areas to achieve
maximum strength.
Belt
Adjustment
Positive screw type belt tensioners.
(2) per deck. Axles
Wheels
Tires
Rated at 6000 lbs. with re-greasable hubs
6 bolt, 5-1/2” bolt circle
2-LT305/70 R16
Deck
Construction
3/16” steel plate formed and welded
with supporting members at high
stress areas to achieve maximum
strength. Deck is 7” deep. Hitch 4 positions, with height settings from 10-
1/2” to 15”. Safety chain with hook
according to Dept. of Transport
regulations.
Cutting
Height
Easy and accessible screw
mechanism. Infinite number of
adjustments from ½” to 4” Tongue
Weight
Transport position – 1260 lbs.
Mowing position – 560 lbs.
Spindles 12 spindles, (4) 35mm spindles per
deck are each carried in 2 sealed ball
bearings, which are housed, in a
precision machined hub. Cylinders
Screw
Jack
Rear deck: (1) 3” x 12” double acting
Wing deck: (2) 3” x 16” double acting
6000 lbs. side wind jack for easy hookup.
Blade Support 3/4” x 2 1/2” x 8” long bar welded to
spindle and machined. 1/2” bolts
hold blade rigid to provide clean
level cut.
Main Gear
Box
4 shaft gear box with (1) 3/8-6 spline
shafts, delivering power to decks.
Blades
Speeds
High lift, heat treated, alloy steel
blades 5/16” x 2 1/2” x 24” (4) per
deck. Optional low-lift and Pro EZ
change blade system available.
Tractor PTO – 540 RPM
Blades – 2890 RPM
Blade Tip Speed 18,300 FPM PTO
Shafts
Deck Drive telescoping agricultural PTO
Drive shafts, with proper safety shields.
(1) 3/8-6 spline quick-disconnect yokes on
both ends.
Rollers 6” diameter with 1.88 wall thickness.
Supported by (2) 1.25” two bolt
ductile bearings Input PTO…rated at 85 HP at 540 RPM
Deck PTO…rated at 38 HP at 540 RPM