Connecting the input pto shaft, Transport safety chain – Progressive Turf Equipment TDR-22 1393176 and Above User Manual
Page 24

21
CONNECTING THE INPUT PTO SHAFT
a) Ensure that the tractor engine is shut off and the parking brake is locked.
b) Holding the PTO against the end of the tractor PTO shaft, rotate the tractor
PTO by hand until the shaft slides on slightly.
c) Slide the locking collar on the PTO backwards, releasing the locking
mechanism hold and slide the PTO on.
d) Release the locking ring and pull the PTO shaft backwards until the locking
mechanism snaps into place.
e) Push the shaft forward and backwards to ensure that this is securely locked in
place.
If the PTO shaft comes off during operation, it may cause personal injury and
damage to the PTO shaft and tractor PTO. When checking, make sure the locking
collar is locked, and that the shaft is not just jammed against the end of the tractor
PTO shaft.
TRANSPORT SAFETY CHAIN
It is recommended that the safety chain provided with this mower be attached to the
towing vehicle at all times.
Install a safety chain as shown. After attaching the safety chain, make a test run to
the left and right for a short distance to check for proper adjustment. Readjust to
eliminate a loose or tight chain
.
- TDR-15 0915001 to 1215106 TDR-15 1315107 - 1415136 TDR-15 1415137 and Above TDR-15 Up to 0867018(0867XXX Serials only) TDR-12 Up to 1212029 TDR-12 1412037 and Above TD 65-2 Serial 1365-21376 and Above TD 65 Serial 1365-21376 and Above TD 65-2 Serial Up to 1265-21375 TD 65 Serial Up to 1265-21375 TD 92 SDR-65 10365047 to 13365072 SDR-90 10365047 to 13365072 SDR-65 14365073 and Above SDR-90 14365073 and Above SDR 90 SDR65 TDR-12 1312030 - 1312036 TDR-22 Up to 1291175