Posiflex JIVA XT-3114 - Manual (Page 8)

Part 8
OPENING CABLE COVER
Please follow steps sequentially with reference to pictures below to remove the
cable cover for Gen 7 slim base models.
Step A: Release the base cover.
Step B: Release the of compression lock of base stand cover at both sides.
Step C: Route the cable to the circled holes.
CABLE ROUTE COVER
Please follow the steps below sequentially to ensure cable tie protection.
Step A: Please route the desired cable thru cable route cover at both ends as
indicated. Then connect one end of the cable with the desired input
device and the other one end into the target I/O port.
Step B: Please aim the 4 screws into the 4 holes indicated on the cable
route cover along with the cables necessary for tie protection.
B A C
B A C