Posiflex JIVA XT-3114 - Manual (Page 7)

Part 7
external power source to the set is removed to prevent electric
hazard! Never touch any metal pin in the connectors or
circuits to avoid high voltage hazard or electrostatic
discharge damage unless the operator is well grounded.
Failure to do the above will void the product warranty!
START-UP
Prior to working on XT-3114 touch terminal, its main unit is preliminarily
horizontal and necessarily prepared with a series of essential mechanism
adjustments for adequate operation.
Step A: Release the base cover then pull backward the hinge roller bar
indicated to its most downward position.
Step B: Hold and pull downward the panel main unit indicated then tilt the
neck at its right position.
Step C: For permanent or factory-installed storage, loosen or pull backward
the hinge roller then tilt both the panel main unit and neck at its most
adequate angle for horizontal position.
B A C
B A C