Part 18 – Posiflex FT-7715 User Manual

Page 18

Part 18

the touch driver is properly installed, this touch panel works exactly like a
standard mouse for both interfaces. However, if the system is running under
safe mode, most drivers are disabled in this mode and the touch panel
calibration is therefore not guaranteed. It is recommended to use a standard
USB mouse or keyboard in this mode.

All the below mentioned mouse emulation functions can be

manipulated through relevant software. The system can give a beep and a click
on the left button of a mouse at the point when the touch panel is touched. If
the point touched is dragged across the screen surface, it works as the mouse
drag and drop feature. If the point is touched, released and touched within a
short time interval, it is double-clicking left button of the mouse. To obtain the
effect like clicking on the right button of a mouse, you have to use the “right-
click sticky button tool” for USB touch or you have to go into the controller
for IR touch.

Posiflex USB Touch Manager

A program named “Posiflex USB Touch Manager” and a right-click

sticky button tool in the program group “Posiflex USB Touch Tools” is
installed in the preloaded Windows system with a USB interface touch panel
controller. This program can also be obtained by downloading from the
POSIFLEX web site.

USB Touch Controller

If the FT system purchased is the leading edge Infra Red type touch

models, the touch controller is of USB interface.

Once the USB touch controller driver is installed, the user can utilize

it to control the mouse emulation. However, with this touch controller driver,
certain display mode like full screen display of Windows DOS box should be
avoided.

警告使用者

這是甲類的資訊產品，在居住的環
境中使用時，可能會造成射頻干
擾，在這種情況下，使用者會被要

求採取某些適當的對策。

T31454

警告

本電池如果更換不正確會有爆炸的危險

請依製造商說明書處理用過之電池